Ruby Metrology
Visitors:  
1
2
1
2
7
7

Quick Check

Quick check is a multi function length standard and user can calibrate or verify their measuring instruments on the mentioned steps with various ranges, least count, make, model and types.

1. Vernier and Digital Caliper - OD: 6, 10, 25, 30, 50, 60, 75, 90, 100, 125, 150 mm. ID: 8.5, 27.5, 35 mm. DEPTH: 10, 25, 30, 60 mm.

2. Outside Micrometer  -

Range: 0-25 mm: 6, 10, 25 mm.

Range: 25-50 mm: 25, 30, 50 mm.

Range: 50-75 mm: 50, 60, 75 mm.

Range: 75-100 mm: 75, 90, 100 mm.

Range: 0-150 mm: 6, 10, 25, 30, 50, 60, 75, 90, 100, 125, 150 mm.

3. Height Gauge: 10, 25, 30, 50, 60, 75, 90, 100, 125, 150, 170 mm.

4. Depth Vernier Gauge: 25, 30, 60, 75 mm.

5. Depth Micrometer and Micrometer Heads: 10, 25, 30, 60, 75 mm.

6. Dial Test Indicator (Puppy Dial): 0.025, 0.070, 0.100, 0.140, 0.200, 0.500, 1.0 mm.

7. Plunger Dial Indicator: 0.025, 0.070, 0.100, 0.200, 0.500, 1.500, 3.500, 10, 25, 30, 50, 60, 75, 90, 100, 125, 150 mm.

8. Bore Gauge: 8.5, 27.5, 35.0 mm.

9. Flute Micrometer: 6.0 mm.

10. Bevel Protractor and Combination Sets: 45, 90, 180 degree.

11. V-Block and Try Square: Perpendicularity and parallelism can be estimate.

12. Internal Caliper: 8.5, 27.5, 35 mm.

13. External Caliper: 6, 10, 25, 30, 50, 60, 75, 90, 100, 125, 150 mm.

14. Electronic Probes: 0.030, 0.070, 0.100, 0.200, 0.500, 1.5, 3.5, 10, 25, 30, 50, 60, 75, 90, 100 mm.

 

                                       

Designed by: Go For Solution
Follow Us